










PKM-C01 WiFi 2x200KG Double Swing Gate Opener Automation System


The PKM-C01 WiFi double swing gate opener by Spreest is an automation system featuring two actuators that let you open and close a double swing gate conveniently and safely. It can operate gates with leaves weighing up to 200 kg each, and can also be used with a single-leaf gate.
The opener works with a control board featuring a smart module, so you can handle the entire configuration, remote programming and adjustment of operating parameters from the mobile app – without opening the controller housing or using its buttons.
The app lets you open and close the gate remotely via Wi-Fi or Bluetooth, run the automatic travel learning function once, set the speed and automatic closing time, and share access with other members of your household.
The set includes 2 remote controls, a set of screws, washers and mounting brackets. You can connect the opener directly to an AC 220 V power supply without any additional accessories. The robust construction with an IP55 rating is suitable for use in all weather conditions throughout the year.
Key features
1. Full programming via the app – Configure the opener, set its operating parameters and add remote controls from the XHouse IOT app, without opening the controller or using its buttons.
2. Double swing gate opener for gates weighing 2x200 kg – Two 24 V DC linear actuators, each with a power rating of 40 W, operate swing gate leaves weighing up to 200 kg. The opener can also be used with a single-leaf gate.
3. Automatic travel learning – Run this function once from the menu or app to let the opener automatically save the travel time and select high and low speeds near the end stops.
4. Overload protection – If an obstacle is detected while closing, the gate automatically reverses to the fully open position. You can set the sensitivity separately for each direction and speed.
5. Wi-Fi and Bluetooth control – When the device has access to a network, you can control the gate remotely from anywhere. Without an internet connection, the app automatically switches to Bluetooth within a range of up to 10 m.
6. Remote controls – The set includes 2 remote controls with rolling code encryption, and the controller can store up to 128 remote controls.
7. Adjustable gate opening direction and angle – Install the opener to open inwards or outwards, adjusting the bracket dimensions to achieve the required opening angle, up to a maximum of 110°.
8. Automatic closing – Set the time before the gate closes automatically after opening fully in the app or controller menu, from 0–99 seconds.
9. Manual emergency release – The included key lets you release the actuator and move the gate manually during a power outage.
10. Support for backup power – The controller supports 2 12 V gel batteries connected in series (not included), with an intelligent battery voltage balancing function during charging.
Mobile app
- Remote control – Open and close the gate from anywhere when the device is connected to a Wi-Fi network.
- Bluetooth control – If there is no internet connection and your phone is within 10 m, the app automatically switches to a Bluetooth connection.
- Automatic travel learning – Start this function with one tap in the app, without accessing the control board menu.
- Operating parameter settings – Adjust the speed, automatic closing time, pedestrian mode and overload response.
- Programming remote controls and cards – Add and remove RF remote controls and USB cards directly from your phone, without opening the controller housing.
- Sharing access – Generate a QR code and share gate control with household members or guests.
- Remote service support – The Remote Assistance function lets an installer diagnose and configure the device remotely after you share a code.
- Event log – View the history of gate openings and closings carried out through the app.
- Gate operating schedule – Set times for the gate to open and close automatically.
Control board components
- Ant – Antenna connection.
- Com – Connection to the COM or GND terminal.
- Card – Connection for an external gate-opening device (e.g. a card reader).
- 2 Side – Connection for a device controlling both gates.
- 1 Side – Connection for a device controlling one gate.
- Com – Connection to the COM or GND terminal.
- Ph – Infrared input for connecting a photocell.
- Vcc – Power output for the photocell and other external devices, continuous current ≤0,5 A.
- Lock -, Lock + – Connection for an electric lock.
- Lamp -, Lamp + – Connection for a warning light.
- Motor 1 – Secondary gate leaf – closes first and opens last.
- Motor 2 (Main) – Main gate leaf – opens first and closes last. For a single-leaf gate, connect the motor to this terminal only.
- Bat-/Bat+/Bat-/Bat+ – Connection for 2 12 V gel batteries (backup battery power supply).
- DEC/Smart – Decreases the set value and operates the smart module.
- USB – Port for connecting a USB drive to update the software.
- Learn – Programming and deleting remote controls.
- FUNC – Opens the settings menu and confirms data.
- Menu – Digital display showing the set data.
- INC/Start – Increases the set value and controls the system in single-button mode.
- Touch – Port for connecting a touch button and similar devices.
- Power – Connection for an AC transformer or a 24 V DC solar panel.
- ON – Power on/off switch.
Technical specifications
- Mobile app: Yes (Android/iOS)
- Actuator motor supply voltage: 24 V DC
- Motor power: 40 W
- Controller supply voltage: AC 220 V ±10% / AC 120 V ±10% (transformer built into the control board)
- Motor rotational speed: 250 rpm
- Arm extension speed: 1,6 cm/s
- Maximum arm stroke: 300 mm
- Maximum continuous operating time: 5 minutes
- Maximum gate leaf length: 2,5 m
- Maximum gate leaf weight: 200 kg
- Operating temperature: -45°C ~ +50°C
- IP rating: IP55
- Maximum gate opening angle: 110°
- Control board output voltage: AC 19,6–21,6 V / DC 24–28 V
- Backup battery: 2x 12 V gel batteries connected in series (batteries not included)
- Remote control coding: Factory rolling code
- Maximum number of programmed remote controls: 128 pcs
- Colour: Silver
- Dimensions: 81 x 27 x 23 cm
- Weight: 12,05 kg
Set includes
- 1x PKM-C01 WiFi automatic double swing gate opener 2x200KG
- 2x Remote control
- 1x Set of screws, washers, brackets and mounting screws
- 1x User manual












